Software release
■
1-port: JUNOS 8.5 and later (Type 1)
■
2-port: JUNOS 8.5 and later (Type 2)
■
4-port: JUNOS 8.5 and later (Type 2)
■
10-port: JUNOS 8.5 and later (Type 3)
■
One, two, four, or ten Gigabit Ethernet ports
■
Power requirement:
■
1-port: 0.25 A @ 48 V (11.9 W)
■
2-port: 0.25 A @ 48 V (11.9 W)
■
4-port: 0.50 A @ 48 V (23.8 W)
■
10-port: 0.62 A @ 48 V (29.9 W)
■
Supports large Ethernet frame sizes for more efficient throughput across the intra-POP
network
Description
■
High-performance throughput on each port at speeds up to 1 Gbps
■
Autonegotiation between Gigabit Ethernet circuit partners
■
Full-duplex mode
■
Maximum transmission units (MTUs) of up to 9192 bytes
Hardware features
■
Virtual Router Redundancy Protocol (VRRP) support
■
802.1q virtual LANs (VLANs) support
■
960 destination MAC filters per port
■
Optical diagnostics and related alarms on the 2-port, 4-port, and 10-port PICs
■
64 source MAC filters per VLAN on the 1-port, 2-port, and 4-port PICs
■
1024 source MAC filters per port on the 1-port, 2-port, and 4-port PICs
■
Flexible Ethernet encapsulation on the 1-port, 2-port, and 4-port PICs
■
Multiple tag protocol identifiers (TPID) support on the 1-port, 2-port, and 4-port PICs
■
Source MAC learning on the 1-port, 2-port, and 4-port PICs
■
MAC accounting and policing—Dynamic local address learning of source MAC addresses
on the 1-port, 2-port, and 4-port PICs
NOTE: The 10-port Gigabit Ethernet PIC with SFP does not support MAC accounting and
policing, MAC learning, TPID, or flexible Ethernet encapsulation.
The 10-port Gigabit Ethernet PIC supports 64 source MAC filters per port.
Software features
Gigabit Ethernet PICs with SFP ■ 45
Gigabit Ethernet PICs with SFP
Comments to this Manuals